Product Description
The whole machine is composed of double tables, suitable for circuit/solder mask/plug hole ink printing production process, adopts well-known electrical hardware configuration at home and abroad, equipped with advanced design concepts and stable mechanical structure ratios, and is supported by a number of patented technologies Ensure stable and reliable production and operation of products.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: AirTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
Printing distance: 0～10 mm
Minimum processing size: 350mm×400mm
Clearance from the board: 0～10mm
Board thickness range: 0.8-4.0mm
Fine adjustment of screen frame: X, Y, θ±5mm
Printing speed: 30～300 mm/sec adjustable
Fixed screen frame: fixed at six points
Maximum screen frame size: 1200×1100mm
Covering/scraping angle: ±15°
Minimum screen frame size: 800×800mm
Scratch stroke: servo 0～900 mm adjustable
Table top level accuracy: ±0.1mm/m2
Equipment power: 3 KWH
Squeegee pressure uniformity: ≤5kgf
Equipment size: 3880×1750×1900 mm
Product Performance
Using servo scraper bottom, frequency can be set and adjusted
The self-locking function is set mechanically to ensure the stability and balance of the plug hole silk screen
Fully intelligent alignment system, no need to adjust alignment by handwheel
Four-column power lifting system, with high mechanical strength, good rigidity and strong stability
Product Description
The whole machine is composed of double tables, suitable for circuit/solder mask/plug hole ink printing production process, adopts well-known electrical hardware configuration at home and abroad, equipped with advanced design concepts and stable mechanical structure ratios, and is supported by a number of patented technologies Ensure stable and reliable production and operation of products.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: AirTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
Printing distance: 0～10 mm
Minimum processing size: 350mm×400mm
Clearance from the board: 0～10mm
Board thickness range: 0.8-4.0mm
Fine adjustment of screen frame: X, Y, θ±5mm
Printing speed: 30～300 mm/sec adjustable
Fixed screen frame: fixed at six points
Maximum screen frame size: 1200×1100mm
Covering/scraping angle: ±15°
Minimum screen frame size: 800×800mm
Scratch stroke: servo 0～900 mm adjustable
Table top level accuracy: ±0.1mm/m2
Equipment power: 3 KWH
Squeegee pressure uniformity: ≤5kgf
Equipment size: 3880×1750×1900 mm
Product Performance
Using servo scraper bottom, frequency can be set and adjusted
The self-locking function is set mechanically to ensure the stability and balance of the plug hole silk screen
Fully intelligent alignment system, no need to adjust alignment by handwheel
Four-column power lifting system, with high mechanical strength, good rigidity and strong stability
粤公网安备44000000000000号
